FixVault
Home › Chrysler › 2009 › 300 LX › Repair and Diagnosis › External Pages › Different car › Section 232 (Cruise Control Systems (Service Information)) › Speed Control - Service Information › Module-Adaptive Cruise Control › Operation › Module - Adaptive Cruise Control › To Set a Desired Speed:

To Set a Desired Speed:

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ACC Menu Display In EVIC (ACC SET: 60 MPH)
GC0052555Courtesy of CHRYSLER LLC

When the vehicle reaches the speed desired, push the lever down and release ("SET/DECEL"). The EVIC will display the set speed.

Fig 2: ACC Menu Display In EVIC (DRIVER OVERRIDE)
GC0052556Courtesy of CHRYSLER LLC

Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs:

  1. The message "DRIVER OVERRIDE" will display in the EVIC.
  2. The system will not be controlling the distance between your vehicle and the vehicle ahead.
  3. The vehicle speed will only be determined by the position of the accelerator pedal.
About FixVault