FixVault
Home › Chrysler › 2009 › 300 LX › Repair and Diagnosis › External Pages › Different car › Section 232 (Cruise Control Systems (Service Information)) › Speed Control - Service Information › Module-Adaptive Cruise Control › Removal › Module - Adaptive Cruise Control

Module - Adaptive Cruise Control

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Dams
GC0052577Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove air dam panels.
    Fig 2: Air Dams Removed
    GC0052578Courtesy of CHRYSLER LLC
  3. Air dam panels removed.
    Fig 3: Mounting Bolts
    GC0052579Courtesy of CHRYSLER LLC
  4. Remove 3 mounting bolts.
  5. Remove module/sensor assembly.
    Fig 4: Wiring Clip Location
    GC0052580Courtesy of CHRYSLER LLC
  6. Remove wiring harness clips from bracket and radiator side shield.
    Fig 5: Wiring Connector
    GC0052581Courtesy of CHRYSLER LLC
  7. Disconnect electrical connector.
  8. Remove assembly.
About FixVault