Mark Centerline On Windshield
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Take a measurement (2) across the lower edge of the tint band at the top of the windshield on each side of the glass as the reference points.
- Divide the upper measurement (2) in half and mark that dimension near the lower edge of the tint band on the glass using a grease pencil or equivalent. This is the upper centerline of the glass.
- Take a measurement (1) across the upper edge of the blackout area at the base of the windshield using the inside corner where each side blackout area intersects the lower blackout area as the reference points.
- Divide the lower measurement (1) in half and mark that dimension near the upper edge of the lower blackout area on the glass using a grease pencil or equivalent. This is the lower centerline of the glass.
- Connect the top center mark and the lower center mark and mark a straight line (3) for the center of the glass.