FixVault
Home › Chrysler › 2009 › 300 LX › Repair and Diagnosis › External Pages › Different car › Section 288 (Electronic Control Modules (Service Information)) › MODULE, Engine Control › Removal › Removal

MODULE, Engine Control: Removal: Removal

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ECM Location
GC0079963Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the cowl panel cover. Refer to Body/Exterior/COVER, Cowl Panel - Removal .
  3. Disconnect the electrical connectors from the Engine Control Module (ECM).
  4. Remove the two bolts that secure the ECM and bracket to the inner fender.
  5. Remove the ECM and bracket from the vehicle.
  6. If required, remove the two nuts that secure the bracket to the ECM and remove the bracket from the ECM.
About FixVault