Anchor, Child Seat: Description: Description
The Lower Anchors and Tether for CHildren, or LATCH child restraint anchorage system provides for the installation of suitable child restraints in certain seating positions without using the seat belt provided for that seating position. The second row seats are equipped with a fixed-position child restraint upper tether anchor for both the outboard seating positions.
There are child restraint lower anchors for both outboard seating positions in the second row. The lower anchors are permanently mounted on the second row seat frames. These anchors are also constructed from a heavy-gauge steel wire loop welded to the frame. They are each accessed from the front of their respective seats, at each side where the seat back meets the seat cushion. These lower anchors cannot be adjusted or repaired and, if faulty or damaged, the entire seat frame must be replaced.
This model is equipped with a Lower Anchors and Tether for Chldren, or LATCH child restraint anchorage system. The LATCH system provides for the installation of suitable child restraints in certain seating positions without using the standard equipment seat belt provided for that seating position. The rear seats are equipped with a fixed-position child restraint upper tether anchor for both the two outboard seating positions, and child restraint lower anchors for the two outboard seating positions only.
The two upper tether anchors are integral to the rear seat back attachment panel. There is a separate molded plastic trim bezel located around each of the two anchors. The child restraint upper tether anchors cannot be adjusted or repaired and, if faulty or damaged, they must be replaced with the rear seat back attachment panel.