FixVault
Home › Chrysler › 2009 › Sebring Base, 2D Convertible, ED3 › Repair and Diagnosis › External Pages › Different car › Section 75 (Power Distribution System) › Junction Block › Installation › Installation

Junction Block: Installation: Installation

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors to Junction Block.
  2. Install the Junction Block.
  3. Connect the battery negative cable.
About FixVault