FixVault
Home › Chrysler › 2009 › Sebring Base, 2D Convertible, EDG › Repair and Diagnosis › Engine Performance › Ignition System › Ignition Control (Service Information) › CAPACITOR, Ignition › Removal › 2.0, 2.4L

2.0, 2.4L

Fig 1: Removing/Installing Ignition Capacitor - 2.0L/2.4L
GC0084713Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable at battery.
  2. Remove electrical connector (1).
  3. Remove mounting bolt (3) and ignition capacitor (2).
About FixVault