FixVault
Home › Chrysler › 2009 › Sebring Base, 2D Convertible, EDG › Repair and Diagnosis › Engine Performance › Ignition System › Ignition Control (Service Information) › COIL, Ignition › Installation › 2.0, 2.4L

2.0, 2.4L

Fig 1: Removing/Installing Ignition Coil
GC0082371Courtesy of CHRYSLER LLC
  1. Install ignition coil.
    Fig 2: Removing/Installing Ignition Coil Mounting Bolts
    GC0082370Courtesy of CHRYSLER LLC
  2. Tighten bolt to 9 N.m (79.5 in. lbs.).
  3. Connect electrical connectors and lock.
  4. Install the negative battery cable.
About FixVault