2.0, 2.4L

Fig 1: Identifying Ignition Coil Electrical Connectors

Courtesy of CHRYSLER LLC

NOTE: Prior to removing coil, spray compressed air around coil top to make sure no dirt drops into the spark plug tube.

The electronic ignition coil attaches directly to the valve cover.

Remove the negative battery cable.
Disconnect electrical connector from ignition coil.

Fig 2: Removing/Installing Ignition Coil Mounting Bolts
Courtesy of CHRYSLER LLC
Remove ignition coil mounting bolts.

Fig 3: Removing/Installing Ignition Coil
Courtesy of CHRYSLER LLC
Remove ignition coil.