2.0L/2.4L Engine

Fig 1: WATER PUMP - 2.0L/2.4L GAS ENGINE

Courtesy of CHRYSLER LLC

1 - WATER PUMP PULLEY

2 - BOLT

3 - WATER PUMP

4 - WATER PUMP HOUSING

5 - NUT

6 - WATER PUMP RETURN TUBE

Position the water pump assembly (3) into the water pump housing (4).
Install the mounting bolts (2). Tighten the bolts to 24 N.m (18 ft. lbs.).
Install the water pump pulley (1). Tighten the bolts to 9 N.m (80 in lbs.).
Install the drive belt splash shield.
Lower the vehicle.
Install the accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Installation .
Connect the negative battery terminal.
Evacuate air and refill cooling system. See Cooling/Engine/PUMP, Water - Standard Procedure .
Check cooling system for leaks. See Cooling - Standard Procedure .