FixVault
Home › Chrysler › 2009 › Sebring LX, 2D Convertible, EDG › Repair and Diagnosis › External Pages › Different car › Section 9 (Electronic Control Modules (Service Information)) › MODULE, Final Drive Control › Installation › Installation

MODULE, Final Drive Control: Installation: Installation

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install ECC module into mounting studs.
  2. Install mounting nuts and tighten to 8N.m (71 in. lbs.) torque.
  3. Install the electrical connector.
  4. Install the left front trim panel.
About FixVault