MODULE, Engine Control: Installation: Installation

Fig 1: 09 JC 2.0L DIESEL ECM

Courtesy of CHRYSLER LLC

1. Install ECM (3) on mounting bracket. Torque fastener to 10.7N.m (95 lbs. in.).
2. Connect both ECM electrical connectors (1).
   Fig 2: AIR INLET DUCT

   Courtesy of CHRYSLER LLC
3. Install air filter housing assembly (2). Refer to the appropriate service information.
4. Connect vacuum hose (1).
5. Connect negative battery cable.
6. Install air inlet tube (3).
7. Reprogram ECM. See Electrical/Electronic Control Modules/MODULE, Engine Control - Standard Procedure .