FixVault
Home › Chrysler › 2012 › 300 C, 4WD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Module, Integrated Center Stack Screen › Installation › Installation

Module, Integrated Center Stack Screen: Installation: Installation

Fig 1: Retainers
GC0144627Courtesy of CHRYSLER GROUP, LLC
  1. Position the (ICS) screen module (2) into the bezel and install the retainers (1).
    Fig 2: Harness Connectors & Integrated Center Stack (ICS) Screen Module
    GC0144619Courtesy of CHRYSLER GROUP, LLC
  2. Connect the harness connectors (2 & 3) to the rear of the Integrated Center Stack (ICS) screen module (1).
    Fig 3: 40 - Way Connector
    GC0144026Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    In the event that the locking tab breaks or is broken, do not replace the harness. The connector will still lock and the harness will still function as designed.

  3. Carefully connect the 40 - way connector (1).
    Fig 4: Instrument Cluster Bezel Retainer
    GC0144691Courtesy of CHRYSLER GROUP, LLC
  4. Install the instrument cluster center bezel (2). Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
  5. Connect the negative battery cable.
About FixVault