Wheel, Steering: Removal: Removal

WARNING:

Before servicing the steering column, the airbag system must be disarmed. Refer to RESTRAINTS - SERVICE INFORMATION for service procedures. Failure to do so may result in accidental deployment of the airbag and possible personal injury.

Position the front wheels straight-ahead .
Fully extend the adjustable steering column.
Disconnect the negative (ground) cable from the battery.
Remove the driver airbag. Refer to AIR BAG, DRIVER, REMOVAL .

Fig 1: Pinch Bolt, Steering Wheel Electrical Connectors, Steering Wheel Bolt & Wheel Damper
Courtesy of CHRYSLER GROUP, LLC
Disconnect all electrical connectors (2).
Remove the steering wheel retainer bolt (3) and the steering wheel damper (4), then slide the steering wheel (5) off the shaft.
If wheel is being replaced, transfer attached components as necessary.