Heater, Engine Block: Installation: 3.6L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 3.6L Engine Block Heater & Cylinder Block

Courtesy of CHRYSLER GROUP, LLC

Clean block core hole and heater seat.
Insert heater block (1) assembly.
With block heater seated, tighten screw (2) to 12N.M (106 in.lbs.) to assure a positive seal.
Install power cord plug to block heater (1).

Fig 2: A/C Compressor & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .