Jumper Harness
WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the ORC jumper harness (2) to the body harness (3).
- Connect the ORC jumper harness connector (4) to the ORC (1).
- Install the center console. Refer to HOUSING, SHIFTER, INSTALLATION .
- Do not reconnect the negative cable to the battery at this time. The Supplemental Restraint System (SRS) Verification Test procedure should be performed following service of any SRS component.
Refer to STANDARD PROCEDURE .