Jumper Harness
WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
- Open hood.
- Disconnect and isolate the negative cable from the battery. Wait two minutes for the system capacitor to discharge before further service.WARNING:
Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.
- Remove the center console. Refer to HOUSING, SHIFTER, REMOVAL .
- Disconnect the ORC jumper harness (2) electrical connector at the ORC (4) and then the body harness (3).