Module, Drivetrain Control: Removal: Removal

Fig 1: Trunk Welt

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the battery negative cable.
2. Open the trunk lid.
3. Remove the trunk trim panel. Refer to PANEL, TRUNK TRIM, REMOVAL .
   Fig 2: Drivetrain Control Module Connectors

   Courtesy of CHRYSLER GROUP, LLC
4. Remove the fasteners and pull back the Right Hand (RH) side trunk welt to gain access to the Drivetrain Control Module (DTCM).
   Fig 3: Drivetrain Control Module Nuts

   Courtesy of CHRYSLER GROUP, LLC
5. Disconnect the wire harness connectors (1).
6. Remove the two nuts (1) holding the DTCM in place.
7. Remove the DTCM.