Diagnostic Test

CHECK FOR AN ACTIVE DTC
1. Ignition on, engine not running.
2. With a scan tool, view DTCs.
  Is the DTC Active?
  
  Yes
  - Go To 3
  No
  - Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to INTERMITTENT CONDITION .
CHECK FOR OTHER DTCS
1. Refer to the recorded DTCs.
  Are there any CAN B and C communication DTCs active or pending?
  
  Yes
  - Perform the applicable diagnostic procedure(s). Refer to 2.4L - DIAGNOSTIC CODE INDEX .
  No
  - Go To 3
ABS COMMUNICATION RELATED DTCs IN OTHER MODULES
1. With the scan tool, select Network Diagnostics.
  Is there more than one module with active DTCs "Logged Against" the ABS at this time?
  
  Yes
  - Replace and program the Anti-Lock Brake Control Module (ABS) in accordance with the service information. Refer to INTEGRATED CONTROL UNIT (ICU), REMOVAL .
  - Perform the ABS VERIFICATION TEST. Refer to ABS VERIFICATION TEST .
  No
  - Replace and program the Powertrain Control Module (PCM) in accordance with the service information. Refer to MODULE, POWERTRAIN CONTROL, REMOVAL .
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST . .