FixVault
Home › Chrysler › 2017 › 200 LX, Eng CD ED8 › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System › Engine › Pump, Water › Removal › 2.4L

Pump, Water: Removal: 2.4L

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the right front tire.
  3. Remove the right front wheel house splash shield Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .

    .

  4. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  5. Drain the coolant.
  6. Remove the serpentine belt.
    GC0098471Courtesy of CHRYSLER GROUP, LLC
  7. Remove the three water pump pulley bolts (1). Remove the water pump pulley (2).
  8. Remove the water pump bolts (3).
  9. Remove the water pump (4) and the water pump gasket (8).
  10. Inspect the water pump housing (6) for impeller contact.
  11. Clean the mating surface.
About FixVault