FixVault
Home › Chrysler › 2018 › 300 C › Repair and Diagnosis › External Pages › Different car › Section 2 (Electronic Control Modules (Service Information)) › Module, Fuel Pump Control › Removal

Module, Fuel Pump Control: Removal

WARNING: This page is about a different car, the 2018 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Reposition the right trunk carpet to access Fuel Pump Control Module (FPCM). Refer to CARPET, REMOVAL .
    GC0170087Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the body wire harness connector (2) from the FPCM.
  4. Remove the fasteners (1) that secure the FPCM to the quarter inner panel.
  5. Remove the FPCM from the vehicle.
About FixVault