Valve, Short Runner: Installation
NOTE:
Do not reuse the old Short Runner Valve (SRV) actuator O-ring seal (1).
- Install a new
SRV actuator rubber O-ring seal (1).
- Install the SRV actuator (2). Tighten bolts (1) to the proper specification. Refer to FUEL INJECTION, GAS, TECHNICAL SPECIFICATIONS .
- Install the intake manifold. Refer to INSTALLATION, 5.7L , MANIFOLD, INTAKE, INSTALLATION, 3.6L , and .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.