Power Sunroof Module (PSM): Installation

WARNING: This page is about a different variant/trim than selected.

SUNROOF GLASS MOTOR

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

Install and tighten the fasteners that secure the motor to the sunroof frame. Tighten the fasteners to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
Perform the Sunroof Initialization and Obstacle Detection Calibration. Refer to MOTOR, SUNROOF, STANDARD PROCEDURE .

SUNSHADE MOTOR

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

Install and tighten the fasteners that secure the motor to the sunroof frame. Tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
Perform the Sunroof Initialization and Obstacle Detection Calibration. Refer to MOTOR, SUNROOF, STANDARD PROCEDURE .