Diagnostic Test

CHECK FOR AN ACTIVE DTC
1. Start the engine and test drive the vehicle.
2. With the scan tool, read DTCs and record on the repair order.
  Is the DTC active or pending?
  
  Yes
  - Go To 2
  No
  - Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to: INTERMITTENT CONDITION .
POWERTRAIN CONTROL MODULE (PCM)
1. Perform any Service Bulletins that may apply.
  Were any Service Bulletins found?
  
  Yes
  - Repair as necessary.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to: POWERTRAIN VERIFICATION TEST .
  No
  - Replace and program the Powertrain Control Module (PCM) in accordance with the Service Information. Refer to MODULE, POWERTRAIN CONTROL (PCM), REMOVAL AND INSTALLATION .
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to: POWERTRAIN VERIFICATION TEST .