Description & Operation

When the ignition switch is at ON position, a power window (main or sub) switch UP or DOWN is pressed, current flows through the sub-fusible link No. 9 and to the power window motor, thus causing the door window glass to close or open. When the DOWN side of the power window main switch at the driver's side is pressed all the way down, it is locked at the pressed-in position, and the power window motor operates until the door glass is fully opened.

When the power window lock switch is set to the LOCK position, the power window motor will not operate if any switch other than at the driver's side is operated. A circuit breaker is provided in the power window motor in order to prevent damage to the motor as a result of excessive current.

If timer function of the Electronic Timer Alarm Control System (ETACS) permits the power window relay to remain ON for 30 seconds after the ignition switch is switched OFF. If during that period of time, the front door is opened, the power window relay is switched OFF, and the power windows can no longer be operated.