FixVault
Home › Dodge and Ram › 1992 › Stealth Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - System/Component Tests › Idle Control System › Idle Speed Control (ISC) Motor Resistance Test › Diamante

Idle Speed Control (ISC) Motor Resistance Test: Diamante

  1. Disconnect ISC motor connector. Connect Test Harness (MD998463 ) to ISC motor connector. Measure resistance between White clip and Red clip or Blue clip. Resistance should be 28-33 ohms.
  2. Measure resistance between Green clip and Yellow clip or Black clip. Resistance should be 28-33 ohms. If resistance is not correct, replace ISC motor.
About FixVault