FixVault
Home › Dodge and Ram › 1993 › Dakota S › Repair and Diagnosis › External Pages › Different car › Section 1 (Engine Controls - Tests W/Codes - Body Control Computer) › Verification Test › Verification Procedure VER-1

Verification Procedure VER-1

WARNING: This page is about a different car, the 1993 Plymouth Voyager, 1993 Plymouth Grand Voyager, 1993 Dodge Grand Caravan, 1993 Dodge Caravan, and 1993 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure ignition is off and DRB-II is connected. Turn ignition on. If DRB-II screen is blank, go to TEST 2A. If DRB-II screen is not blank, go to next step.
  2. If there is a bus failure message on DRB-II, go to TEST 1A. If there is no bus failure message on DRB-II, select module in question. If DRB-II shows NO RESPONSE, go to TEST 1A.
  3. If DRB-II does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, go to TEST 1A. If original complaint is not present, repair is complete.
About FixVault