FixVault
Home › Dodge and Ram › 1993 › Grand Caravan Base › Repair and Diagnosis › Body & Frame › Power Seats › Testing › Motor Test › Front Motor

Front Motor

  1. Remove switch from mounting position and disconnect switch from harness. See SWITCH  under REMOVAL & INSTALLATION.
  2. Connect jumper wire between terminals No. 2 and 8. See Figure . Connect a second jumper wire between terminals No. 6 and 5. If motor does not operate, reverse jumpers (No. 2 to No. 5 and No. 6 to No. 8). If motor still does not operate check wiring between switch connector and motor assembly. If wiring is good, replace motor assembly.
About FixVault