FixVault

VEHICLES TESTED Mode

  1. Mode is used to show what vehicles are covered by DRB-II cartridge. To access vehicles tested mode, turn ignition off. Attach DRB-II to engine diagnostic connector. Connector is located in engine compartment, near PCM.
  2. Turn ignition switch to RUN position. All DRB-II character positions will illuminate and copyright information will appear on screen. After several seconds, DRB-II menu will appear.
  3. At DRB-II menu, press "1" (VEHICLES TESTED) key. Press ENTER key. DRB-II will display vehicles covered by cartridge. Screen will display for 5 seconds and return to DRB-II menu.