FixVault
Home › Dodge and Ram › 1996 › Stealth Base, Standard › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Diagnosis › Cruise Control Switch Function

Cruise Control Switch Function

NOTE: If vehicle speed decreases approximately 9 MPH below set speed, set speed will be canceled.
  1. Cruise control switch is mounted separately to steering wheel. Turn main cruise control switch to ON position. Cruise control indicator on instrument cluster should come on.
  2. To operate cruise control system, drive vehicle at desired speed between 25 and 90 MPH. Move cruise control switch downward to set desired speed. Set indicator light should come on.
  3. Vehicle speed should stay at set speed. To increase set speed, move control switch upward to RESUME position and hold until new set speed is reached. To lower set speed, move control switch down to COAST position. Hold until new set speed is reached.
  4. To return to set speed after cancellation, move control switch upward to RESUME position. Vehicle speed should return to previous setting before cancellation. Set speed should cancel when any of the following occurs:
    • Brake pedal is depressed.
    • Clutch pedal is depressed.
    • Cruise control main switch is turned to OFF position.
    • Ignition switch is turned to OFF position.
    • Transmission is shifted to Neutral or Park.
About FixVault