Power Window Switch
Remove power window switch. Using an ohmmeter, check continuity between appropriate switch terminals. See appropriate table:
See Fig 1 or Fig 2 . If continuity is not as specified, replace power window switch.
DRIVER'S WINDOW SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Off | 1 & 2; 1 & 4; 1 & 5; 1 & 6; 2 & 4; 2 & 5; 2 & 6; 4 & 5; 4 & 6; 5 & 6 | |
| Up | ||
| Driver | 1 & 3; 2 & 4 | |
| Passenger | 3 & 5; 4 & 6 | |
| Down | ||
| Driver | 1 & 4; 2 & 3 | |
| Passenger | 3 & 6; 4 & 5 | |
PASSENGER WINDOW SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Off | 2 & 5; 1 & 4 |
| Up | 1 & 4; 3 & 5 |
| Down | 1 & 3; 2 & 5 |