FixVault

Specifications Index

DURANGO SPECIFICATIONS INDEX

System Specification/Procedure
Air Conditioning
Service SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Axle Nut/Hub Nut 180 Ft. Lbs. (244 N.m)
Battery See BATTERY SPECIFICATIONS table under CAPACITIES .
Brakes
Bleeding Sequence
With ABS BLEEDING BRAKE SYSTEM
Without ABS BRAKE BLEEDING
Disc Brakes BASE BRAKE SPECIFICATIONS
Drum Brakes BASE BRAKE SPECIFICATIONS
Torque TORQUE SPECIFICATION
Charging
Generator See GENERATOR APPLICATION table under DESCRIPTION
Torque TORQUE SPECIFICATIONS
Drive Belts
Adjustment BELT ADJUSTMENT
Belt Routing DRIVE BELT ROUTING
Engine Cooling
General Service Specifications COOLING SYSTEM SPECIFICATIONS
Radiator Cap Pressure 16 psi
Thermostat R & I N/A
Water Pump R & I WATER PUMP
Engine Mechanical
Compression ENGINE COMPRESSION
Oil Pressure Oil pressure is 6 psi (.4 kg/cm2 ) at idle, and 30-80 psi (2.1-5.6 kg/cm2 ) at 3000 RPM with engine at normal operating temperature.
Overhaul ENGINE SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Fluid Specifications See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Drive Plate/Flex Plate Torque 55 Ft. Lbs. (75 N.m)
Fuel System
Fuel Filter Location FUEL FILTER
Pressure Specification FUEL PUMP (GASOLINE)
Fuel Pressure Test Procedure FUEL PRESSURE TEST
Fuel Pressure Release Procedure FUEL PRESSURE RELEASE
Ignition
Firing Order & Cylinder Identification FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires (Resistance) HIGH TENSION WIRE RESISTANCE
Ignition Wires (Routing) FIRING ORDER & TIMING MARKS . Wire routing may be located in Figures.
Spark Plugs SPARK PLUGS
Starting
Starter STARTER SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Wheel Alignment
Adjustment Specifications ALIGNMENT SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Wheel & Tire
Lug Nut Torque 85-110 Ft. Lbs. (115-149 N.m)