FixVault
Home › Dodge and Ram › 1999 › Neon R/T, T350 › Repair and Diagnosis › Body & Frame › Door Locks › Remote Keyless Entry Systems › Programming › Transmitter Programming › Panic Enable/Disable

Panic Enable/Disable

  1. Access RKE programming lead behind passenger side kick panel. Programming lead is Green with a Red bullet connector. Using jumper wire, connect lead to ground. Turn ignition on. Press any button on transmitter. Locks will cycle to confirm programming.
  2. Press PANIC button 4 times. Horn will sound to confirm programming. If second transmitter needs programming, duplicate procedure used on first transmitter.
  3. Once second transmitter is programmed (if needed), disconnect programming lead. System will return to normal operation. Return programming lead to original position. Operate transmitter(s) to confirm operation.
About FixVault