FixVault
Home › Dodge and Ram › 1999 › Neon R/T, T350 › Repair and Diagnosis › Body & Frame › Door Locks › Remote Keyless Entry Systems › Programming › Transmitter Programming › RKE Module Programming

RKE Module Programming

  1. Access RKE programming lead behind passenger side kick panel. Programming lead is Green with Red bullet connector. Using jumper wire, connect lead to ground. Turn ignition on. Press any button on transmitter to set Vehicle Access Code (VAC). Locks will cycle to confirm programming.
  2. If second transmitter needs programming, press any button on second transmitter to set VAC. Locks will cycle to confirm programming.
  3. Once transmitter(s) is programmed, disconnect programming lead. System will return to normal operation. Return programming lead to original position. Operate transmitter(s) to confirm operation.
About FixVault