Power Mirror Switch
Remove power mirror switch and disconnect harness connector. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check continuity between power mirror switch terminals with switch in appropriate position. See POWER MIRROR SWITCH CONTINUITY TEST table. See Fig 1 . If continuity is not as specified, replace switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Mirror Selector Position | Continuity Between Terminals No. | |
|---|---|---|
| "L" (Left) | ||
| Up | 1 & 7; 3 & 8; 4 & 7 | |
| Down | 1 & 8; 3 & 7; 4 & 8 | |
| Left | 2 & 7; 3 & 8; 5 & 7 | |
| Right | 2 & 8; 3 & 7; 5 & 8 | |
| "R" (Right) | ||
| Up | 1 & 7; 4 & 7; 6 & 8 | |
| Down | 1 & 8; 4 & 8; 6 & 7 | |
| Left | 2 & 7; 5 & 7; 6 & 8 | |
| Right | 2 & 8; 4 & 8; 6 & 7 | |