FixVault
Home › Dodge and Ram › 2002 › Durango Base, 5.9 Z, 4WD, Part Time › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling › Engine Coolant Temperature Sensor › Installation › Installation - 4.7L

Installation - 4.7L

  1. Install sensor.
  2. Tighten to 11 N.m (8 ft. lbs.) torque.
  3. Connect electrical connector to sensor.
  4. Replace any lost engine coolant. (Refer to STANDARD PROCEDURE - ADDING ADDITIONAL COOLANT ).
About FixVault