FixVault
Home › Dodge and Ram › 2002 › Viper ACR › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Fuel Injection › O2 Sensor › Removal › Removal - Upstream 1/1, 1/2

Removal - Upstream 1/1, 1/2

  1. Raise and support vehicle.
  2. Disconnect heated oxygen sensor electrical connector (Fig 1 ).
    Fig 1: Identifying Upstream Heated Oxygen Sensor
    G03330083Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove sensor using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent.
About FixVault