Required Tools And Equipment
- DRBIII® (diagnostic read-out box) scan tool
- Evaporative Emissions Leak Detector #8404
- fuel filler adapter #8382
- fuel pressure adapter (C-6631) or #6539
- fuel pressure kit (C-4799-B) or #5069
- fuel release hose (C-4799-1)
- Min air flow fitting #6714
- jumper wires
- ohmmeter
- oscilloscope
- vacuum gauge
- voltmeter
- 12 volt test light minimum 25 ohms resistance with probe #6801
CAUTION:
A 12 volt test light should not be used for the following circuits, damage to the powertrain controller will occur.
- 5 Volt Supply
- 8 Volt Supply
- J1850 PCI Bus
- CCD Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal