FixVault
Home › Dodge and Ram › 2003 › Durango Base, 5.9 Z, 4WD, Part Time › Repair and Diagnosis › Engine Mechanical › Exhaust System › Heat Shields › Installation

Heat Shields: Installation

  1. Position the heat shields to the floor pan or the frame and install the screws and nuts.
  2. Tighten the screws/nuts to 7 N.m (60 in. lbs.) torque. Tighten the muffler hangers to 23 N.m (200 in. lbs.)
  3. Lower the vehicle.
About FixVault