Engine Cranks Does Not Start: Notes

NOTE: For circuit identification and wiring diagram, see WIRING DIAGRAMS . If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See PROGRAMMING in REMOVAL & INSTALLATION - DURANGO article. After each repair procedure has been completed, reconnect all components. Perform the following test to ensure system is functioning properly.

On 4.7L, perform POWERTRAIN VERIFICATION TEST VER-5 under VERIFICATION TESTS in SELF-DIAGNOSTICS - DURANGO - 4.7L article.
On 5.9L, perform POWERTRAIN VERIFICATION TEST VER-5 under VERIFICATION TESTS in SELF-DIAGNOSTICS - DURANGO - 5.9L article.