Engine Controls - Service & Adjustment Specifications: Capacities

FLUID CAPACITIES

Application

⁽¹⁾ Quantity

Automatic Transmission (Mopar® ATF+4, Type 9602)

32RH

Drain & Refill

⁽²⁾ 4.0 Qts. (3.8L)

Dry Refill

⁽³⁾ 6.7 Qts. (6.3L)

46RE

Drain & Refill

⁽²⁾ 4.0 Qts. (3.8L)

Dry Refill

⁽³⁾ 9.6-10.0 Qts. (9.1-9.5L)

Cooling System (Includes 1 Qt. For Coolant Reservoir)

3.9L

14.5 Qts. (13.7L)

5.2L

16.5 Qts. (15.7L)

5.9L

With Rear Heater

16.0 Qts. (15.2L)

Without Rear Heater

15.0 Qts. (14.3L)

Crankcase (Includes Filter) ⁽⁴⁾

3.9L

4.0 Qts. (3.8L)

5.2L & 5.9L

5.0 Qts. (4.7L)

Power Steering Fluid

⁽⁵⁾

Rear Differential ⁽⁶⁾

Model 60 (248-RBI)

6.3 Pts. (3.0L)

8 1/4"

4.4 Pts. (2.08L)

9 1/4"

4.5 Pts. (2.13L)

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Recheck fluid level with transmission at normal operating temperature. Add fluid to bring level to MAX mark on dipstick. Approximate drain and refill capacity is 4.0 qts. (3.8L).

⁽³⁾	Quantity may vary by type of oil cooler and oil cooler lines.

⁽⁴⁾	Use an API energy conserving engine oil that is certified for gasoline engines. Recommended oil viscosity is 10W-30 (preferred) or 5W-30.

⁽⁵⁾	Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid. Do Not Over Fill. Capacity is not available from manufacturer.

⁽⁶⁾	Models with Trac-Lok limited slip differential must have 4 ozs. (118 mL) of Mopar® Trac-Lok friction modifier added if lubricant is changed.