DTC P0135: O2 Sensor 1/1 Heater Failure

NOTE: For component location, see COMPONENT LOCATIONS . For connector identification, see CONNECTOR IDENTIFICATION . For circuit identification and wiring diagram, see WIRING DIAGRAMS . If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See PROGRAMMING .

For testing procedures, see Fig 1 and Fig 2 .

Fig 1: DTC P0135 & P0141: Sensor Heater Failure - Step 1 (1 Of 2)

Courtesy of DAIMLERCHRYSLER CORPORATION

Fig 2: DTC P0135 & P0141: Sensor Heater Failure - Steps 2-6 (2 Of 2)

Courtesy of DAIMLERCHRYSLER CORPORATION