FixVault
Home › Dodge and Ram › 2003 › SRT-4 › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Power Locks › Remote Keyless Entry Module › Installation

Remote Keyless Entry Module: Installation

NOTE: When replacing a faulty RKE Module, the replacement module must be configured with the DRB III® scan tool for proper operation. Additionally, all transmitters must be reprogrammed to the new RKE module.
  1. Install the RKE module into the vehicle.
  2. Connect the RKE wiring connector.
  3. Install the two screws holding the RKE module to the instrument panel assembly.
  4. Install the instrument panel top cover (Refer to INSTRUMENT PANEL/INSTRUMENT PANEL TOP COVER - INSTALLATION ).
  5. Connect the battery negative cable.
About FixVault