FixVault
Home › Dodge and Ram › 2003 › SRT-4 › Repair and Diagnosis › Body & Frame › Windows › Door - Front › Latch › Installation

Door - Front: Latch: Installation

CAUTION: Do not close door before adjusting the door latch. Door may fail to open.
  1. Position door latch inside door and install screws holding latch to door end frame.
  2. Engage wire connector into power door lock motor, if so equipped.
  3. Connect latch and lock rods to door latch.
  4. Install door trim panel and water shield.
  5. Adjust door latch, see ADJUSTMENTS .
About FixVault