Service Specifications

STARTER SPECIFICATIONS

Application

Specification

Maximum Cranking Amperage Draw ⁽¹⁾

500 Amps

No-Load Test At 11.5 Volts (Amperage Draw)

160 Amps

Minimum RPM

⁽²⁾ 5500 RPM

Solenoid Closing Maximum Voltage

7.8 Volts

⁽¹⁾	With engine at normal operating temperature. High viscosity oil, extreme cold temperatures, or an engine with tight piston ring-to-cylinder clearance will increase amperage draw.

⁽²⁾	A cold or new engine will increase starter amperage draw. The use of heavy weight engine oil will also increase starter amperage draw.