Removal - 2.0L/2.4 Turbo/2.4L SRT-4

The knock sensor bolts into the side of the cylinder block in front of the starter under the intake manifold.

Fig 1: Locating Knock Sensor (2.0L/2.4 Turbo/2.4L SRT-4)

Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: View Of Knock Sensor

Courtesy of DAIMLERCHRYSLER CORP.

1. Disconnect electrical connector from knock sensor.
2. Use a crow foot socket to remove the knock sensors.