Controller Antilock Brake: Removal
WARNING: This page is about a different car, the 2004 Dodge SX and 2004 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect battery negative cable.
- Raise vehicle.
- Disconnect pump/motor connector from CAB (Fig 1).
Courtesy of DAIMLERCHRYSLER CORP.
- Remove four screws securing CAB to HCU half of ICU (Fig 1). Remove CAB from HCU.
- Pull outward on CAB connector lock and disconnect 24-way wiring connector. Remove CAB from vehicle.