FixVault
Home › Dodge and Ram › 2004 › Sprinter 2500, Van Cargo, 2.7 43 › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Ignition Control › Glow Plug › Installation

Glow Plug: Installation

  1. Screw glow plug(s) into cylinder head and tighten to 12 N.m (115 lbs. in) (Figure ).
  2. Connect the glow plug wiring harness connector(s)
  3. Install the engine cover.
  4. Connect negative battery cable.
About FixVault