FixVault
Home › Dodge and Ram › 2004 › Sprinter 2500, Van Cargo, 2.7 43 › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Ignition Control › Glow Plug › Removal

Glow Plug: Removal

  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Use special tool #9286 pliers to unplug the glow plug wiring harness connector(s) at the glow plug.
  4. Remove the glow plug(s) (Fig 1 ).
Fig 1: Identifying Glow Plugs
G03566463Courtesy of DAIMLERCHRYSLER CORP.
About FixVault