FixVault
Home › Dodge and Ram › 2005 › SRT-4 › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Powertrain Control Module › Installation › Installation - 2.0L

Installation - 2.0L

  1. Install the assembly, PCM and bracket.
  2. Loose install the mounting nut.
  3. Install the mounting bolts to the bottom of the PCM bracket. See Figure.
  4. Tighten the mounting nut, tighten to
  5. Install the wiring harness clip to the PCM bracket. See Figure.
    NOTE: The electrical connector for the PCM are COLOR Coded.
  6. Connect the electrical connectors and lock at the PCM. See Figure.
  7. Install the air cleaner box, refer to AIR CLEANER HOUSING (2.0) or AIR CLEANER HOUSING (2.4) for more information. See Figure.
  8. Connect the negative battery cable.
About FixVault